- What: Midnight Blue disclosed six flaws in Danfoss AK-SM800A refrigeration controllers that allow remote takeover without authentication, affecting every firmware version up to and including 5.3.2.
- Impact: An attacker with root code execution can change setpoints, trigger defrost cycles, hide activity from logs, plant code that survives factory reset and firmware update, or brick the controller.
- Fix / mitigation: No patch or CVE exists and firmware 5.4.0 does not fix the flaws, so agencies in Belgium, Ireland and Germany direct operators to remove internet exposure and allow remote access only through a secure VPN or protected internal network.
- Who's at risk: Supermarkets, cold storage operators and refrigeration maintenance firms running AK-SM800A controllers with management interfaces reachable from the internet, including through 4G or 5G modems.
Six flaws in Danfoss AK-SM800A refrigeration controllers let a remote attacker take over the device without logging in, according to Dutch security consultancy Midnight Blue. There is no patch, no CVE identifier and no published fix date. The newest firmware, 5.4.0, does not address the flaws. Government cybersecurity agencies in Belgium, Ireland and Germany told operators this week to take controller management interfaces off the internet, and said firmware updates, password changes and Strict mode are not enough on their own.
The timing matters. AK-SM800A controllers run store fridges and freezers, and they were already targets in real attacks: a wave in France starting October 11 and a second wave across Europe that began last week. Those attacks triggered unwanted defrost cycles and destroyed stock. No agency or researcher links the six new flaws to those incidents, and Germany's BSI says it has no information about exploitation of them. But the attacker interest in this exact device class is established.
What Midnight Blue Found
Researcher Carlo Meijer found all six flaws in under an hour of manual review, using firmware Danfoss offers for public download. The team examined version 5.3.2, then the newest release, and says every version up to and including it is affected.
- Five flaws sit in web request handlers that require no login, inside a program that runs as root.
- Through one of those handlers, the researchers achieved root code execution on firmware 3.3.0, and found the same bugs present in 5.3.2.
- The sixth flaw is in the gateway that enforces Strict mode, a separate program that blocks every request except login until a user authenticates.
- Running 5.3.2 in an emulator with Strict mode on, the researchers crashed the gateway with that flaw. They say the crash could be turned into code execution with more work.
- The gateway lacks basic exploit defenses such as stack canaries.
- The controllers do not use secure boot.
Technical details remain private while Midnight Blue coordinates disclosure with Danfoss. The researchers say the code almost certainly holds more flaws of the same kind, and they describe patching flaws one by one or relying on Strict mode as "a misallocation of scarce security and personnel resources."
Why Strict Mode Does Not Close the Gap
Strict mode is the vendor's login protection. It requires encrypted connections and session tokens, and it closes almost all of the controller's web attack surface to unauthenticated users, including the flaw used in the root execution demonstration. That covers five of the six bugs.
The sixth flaw lives in the gateway that enforces Strict mode. A defense that sits in front of the vulnerable handlers is itself vulnerable, and it runs without stack canaries. That is why the Belgian and Irish agencies say Strict mode on an internet-facing controller is not sufficient.
Impact of Root on a Refrigeration Controller
With root code execution, an attacker could change controller settings, start defrost cycles and hide that activity from the controller's logs. Because there is no secure boot, an attacker could plant code that persists through a factory reset and a firmware update, which removes the usual recovery path. An attacker could also render a controller unusable until it is physically replaced. For a grocery chain, that combination means spoiled inventory, compliance exposure on food safety temperatures, and hardware replacement costs across every affected site.
Firmware 5.4.0 and the Vendor Position
Danfoss lists software package 5.4.0, dated November, as its newest AK-SM800A release. The 5.4.0 readme and November update guide cover upgrade steps and add a stricter password rule. Neither mentions a vulnerability fix. In a statement to trade publication Cooling Post, the researchers said 5.4.0 cannot contain a fix: according to its file timestamp, it was likely built on October 29, before the second attack wave and well before their reports.
The BSI initially said in a press release that 5.4.0 was not affected. The same day it issued a correction saying it cannot rule out that 5.4.0 is affected. The Danfoss advisory page lists no entry for the six flaws as of November 16.
This is not the first round. Danfoss fixed earlier AK-SM800A flaws in 2023 and 2025, including login bypass and command injection bugs. Version 5.3.2 postdates all of those fixes and still contains the new six. Danfoss told Cooling Post on October 12 that most units hit in France were older models that no longer receive updates, or current AK-SM800A units on outdated firmware.
What the Agencies Recommend
The Centre for Cybersecurity Belgium says removing internet exposure must not wait for a patch and applies even where firmware is current and Strict mode is on. The Belgian and Irish advisories call for:
- Identifying every controller whose management interface is reachable from the internet, including through a 4G or 5G modem, and removing that exposure.
- Allowing remote access only through a secure VPN or protected internal network. Firewall allowlisting of a service company's IP addresses is described as a short-term measure only.
- Reviewing temperature setpoints, defrost schedules, alarm settings, user accounts and remote-access settings for unauthorized changes.
The BSI adds that suspected compromise warrants changing all credentials and verifying that equipment connected to the controller works properly. The Belgian advisory also notes that operators should check contract and insurance terms before cutting off data a controller sends to its refrigeration service company, and should put protected remote access in place so monitoring continues. Ireland's NCSC still advises current firmware, changed default passwords and Strict mode, but not as a substitute for removing exposure. Danfoss's own update guide agrees: the AK-SM800A should not be directly reachable from the public internet, a recommendation it says "applies to all software versions, including those with Strict Mode enabled."
RedEye Assessment
Six root-level flaws found in under an hour, no secure boot, a vulnerable enforcement gateway, and active campaigns against the same device class add up to a controller that should never face the internet. The hardest part for most operators is visibility: cellular modems installed by third-party maintenance firms rarely appear in corporate asset inventories. Expect the vendor fix timeline to be long and the flaw count to grow.
RedEye Security helps retail and cold chain operators map OT exposure across sites, including vendor-installed cellular paths, and assess remote access arrangements with refrigeration service providers. Contact RedEye for an ICS/OT exposure assessment.
Questions about your exposure?
RedEye Security provides assessments for organizations that need to understand their real risk.
Talk to us